TMD Security door hinges for Defender 90 & 110
Manufactured exclusively for TMD in the UK.
Each Hinge is Manufactured out of Billet Aluminium.
Vapour Blasted and Anodised in Black
They have Stainless Steel Studs on the door side of the hinge so that there is no access to a bolt from the exterior of the vehicle.
On the Front side of the Hinge they are first supplied with a Security fixing bolt, so that the hinge can be attached to the Bulkhead or the B post on a 110, They then have a security cap which screws in on top of this bolt. A unique key for every batch produced will be supplied with the kit.
The door pins are Stainless Steel and have a brass bush to stop wear between the pin & the Aluminium, these pins are machine pressed into the hinge.
90 Kit Contains:- 4 x Hinges, 8 x Stainless Steel Studs, 8 x Security Bolts, 8 x Security Caps, 1 x Security Key, 4 x Plastic Shims.
110 Kit Contains:- 8 x Hinges, 16 x Stainless Steel Studs, 16 x Security Bolts, 16 x Security Caps, 1 x Security Key, 8 x Plastic Shims.
Please note the 110 kit does not have the holes in the back door hinges, as there are only mirrors on the front doors.